Call 973-536-2220
“The Beauty Of Infrared Heat Is That It Heats The Surface And NOT Directly The Air”
On a sunny winter day, the ambient temperature is cold, but you feel the heat rays from the sun warming you. That is what infrared heat is. Infrared heat is available in High Intensity (Smaller Footprint) or Low Intensity (Long Tube) and is typically gas, although electric infrared is available. Units can be installed indoors or outdoors, perimeter heat or heating the whole space.
“When You Heat The Surface And Not The Air, You Create A Flywheel Affect.”
Consider a warehouse where the dock doors are always open. Using a unit heater, it will constantly run to heat the ambient air which quickly dissipates, deeming it ineffective. If you heat the surfaces, the people will feel the rays of the heat, and the floor will absorb the heat. When those dock doors close, the floor will radiate the heat to the area around the strike zone, constantly producing a warming effect.
“Heating The Surface, and Not The Surroundings = Less Heat Required”
Infrared Heat has been around since the 1930s, and studies have confirmed that the minimum radiant efficiency of 35% will allow an IR heater to be sized at 15% less than a comparable forced air unit. Noting Schwank’s products exceed 35% (50% for our contractor grade model, up to 81% for our premium product), we can provide units requiring as little as 58.5% of the net input required when compared to a forced air heater.
You can earn rebates up to $500 per unit by installing Schwank Infrared Heaters! Click here to find out more!
Products
High Intensity (Luminous Heaters)
Low Intensity (Tube Heaters)
New: Schwank superTube (Click Here for Data!)
Applications
Case Studies
Brochures
Contact Page/ 973-536-2220