Desiccant Dehumidifiers
Randy Sapoff2023-06-26T16:23:11+00:00Desiccant Dehumidifiers have the ability to dry air down to any level at any cfm. Units can be independent of the HVAC system or a complete package for all the HVAC needs of the space.
The Good, Better, Best of Dehumidification It is understood that at any point air will have a specific quality in terms of temperature and humidity. If you look at a psychometric chart, the dry [...] Read more →
Desiccant Dehumidifiers have the ability to dry air down to any level at any cfm. Units can be independent of the HVAC system or a complete package for all the HVAC needs of the space.
Mechanical Dehumidification is the most common way of maintaining the proper Relative Humidity (%RH) in a space. From simple basement dehumidifiers to indoor pool dehumidifiers, the cooling coil removes the moisture and process heat brings the temperature back, to allow separate control of temperature and humidity. Explore this option from small to big, indoor and outdoor...
A wrap-around heat pipe is a "C" shaped coil filled with refrigerant which migrates back and forth around a cooling coil. Essentially what occurs is the post cooling coil section will reheat the air while simultaneously pre-cooling the air on the pre-cool side.
PoolPak offers a line of Mechanical Dehumidifiers for Indoor Pools, Spas, Mikvah rooms, Aquariums, etc. Units are available as packages or split systems; indoor and outdoors. Units can simply dehumidify or incorporate heating, cooling, energy recovery and ventilation.
While Fabric Duct Is Best Known For Indoor Pools, There Are Many Applications Where You Can Be Successful like Warehouses, Manufacturing, Gymnasiums, Butler Buildings, Ice Rinks, and Recording Studios. Alternate For Spiral Duct With A 50% Cost Reduction
Water Source Heat Pumps by GeoComfort: One Of The First Companies To Offer MicroChannel Evaporators And Oversized Brazed Plate Heat Condensers To Allow Pre mium Efficiency With The Tightest Footprint in The Industry.
WATER COOLED VAV PACKAGE UNITS ARE NOT THE SAME! While similar in concept to a Rooftop Unit as its the central Heating, Cooling, Ventilation and humidification/dehumidification source for a building or zone, the similarities end there. Replacing a RTU many times means simply replace the box on the curb and you are all set. For an indoor unit you must consider the time and effort to pull the old unit out and getting the new unit in. Many times the existing unit was built during the building construction and it will be near impossible to simply “swap boxes”
Have An Application Where You Need An Water Cooled Condensing Unit? While We Can Offer You the Evaporator/AHU, If You Have A Specific Air Handler, Let Us Match It With An Indoor Condensing Unit! Our Water Cooled Indoor Condensing Units Have Small Footprints! Our Water Cooled Indoor Condensing Units Have Cabinet Configurations for Ceiling Hung or Floor Hung Applicationsunited cool air condensing unit Allow Us To Provide The Evaporator (AHU) Or We Can Match
Warehouses, Distribution Centers and Manufacturing Facilities HVAC Systems are unique due to the fact that the space typically is large and open with very high ceilings. Some Warehouse HVAC systems only require basic inexpensive heat but some require precision temperature and humidity control for product sensitive storage. Engineered Air Solutions have partnered with many manufacturers to provide the right equipment at the right price in the right time frame. We understand the different needs for different applications
CALL 973-536-2220 For vehicle maintenance, the trend of large open areas to carry multiple vehicles as opposed to multiple bay doors is becoming more common. It’s a better experience for the consumer and for [...]